国家军用标准 (GJB)

GJB/Z 25-199 1 　电子设备和设施的接地、搭接和屏蔽设计指南

GJB 1649-1993   电子产品防静电放电控制大纲

GJB 2527-1995   弹药防静电要求

GJB 2605-1996   柔性热密封防静电阻隔材料规范

GJB 3007-1997   防静电工作区技术要求

GJB/Z 86-1997 　静电放电防护包装手册

GJB/Z 105-1998 电子产品防静电放电控制手册

国家 标 准(GB,GB/T,GBJ)

GBJ 79-1985               工业企业通信接地设计规 范

GB 6951-1986 　　　　轻质油品装油安全油面 电 位 值

GB/T 6833.3-1987       电子测量仪器电磁兼容性试验规范静电放电敏感度试验

GB/T 11210-1989 　　 硫化橡胶抗静电和导电制品电阻的测 定

GB 12014-1989 　　　 防静电工作服

GB/T 1410-1989 　　　固体电工绝缘材料体积电阻率及表面电 阻率试验 方法

GB 12158-1990 　　　 防止静 电 事故通用 导则

GB/T 12582-1990 　　 液 态烃类电导 率 测 定方法 ( 精密静 电计 法 )

GB/T 12703-1991 　　 纺织 品静 电测试 方法

GB 13348-1992 　　　 液体石油 产 品静 电 安全 规 程

GB/T 14288-1993 　　 可燃气体与易燃液体蒸气最小静 电 点火能 测 定方法

GB/T 50174-1993 　　 计算机机房 设计规 范

GB 4385-1995 　　　　防静电 鞋、 导电 鞋技 术 要求

GB/T 15463-1995 　　 静电安全名词术语

GB/T 6539-1997 　　　航空燃料与 馏 分燃料 电导 率 测 定法

GB/T 2439-2001 　　　硫化橡胶或 热 塑性橡胶 导电 性能和耗散性能 电 阻率的 测 定

GB/T 2887-2000 　　　电 子 计 算机 场 地通用 规 范

GB 6950-2001 　　　　轻质 油品安全静止 电导 率

GB 4655-2003 　　　　橡胶工 业 静 电 安全 规 程

电 子行 业标 准(SJ,SJ/T)

SJ/T 10147-1991　　　　　　　　 集成 电 路防静 电 包装管

SJ   20154-1992 　　　　　　　　 信息技 术设备 静 电 放 电 敏感度 试验

SJ/T 10533-1994 　　　　　　　　 电 子 设备 制造防静 电 技 术 要求

SJ/T 10630-1995 　　　　　　　　 电 子元器件制造防静 电 技 术 要求

SJ/T 10694-1996 　　　　　　　　 电 子 产 品制造防静 电 系 统测试 方法

SJ/T 11159-1998 　　　　　　　　 地板覆盖 层 和装配地板静 电 性能的 试验 方法

国外静 电 相 关标 准 ESD standards

  ESD S1.1:1998—Evaluation, acceptance, and functional testing of wrist straps.

  ESD STM2.1:1997—Resistance test method for electrostatic discharge protective garments.

  ESD STM3.1:2000—Ionization.

  ESD SP3.3:2000—Periodic verification of air ionizers.

  ESD S4.1:1997—Worksurfaces—Resistance measurements.

  ESD STM4.2:1998—Worksurfaces—Charge dissipation characteristics.

  ANSI/ESD STM5.1:2001—Electrostatic discharge sensitivity testing—Human body model.

  ANSI/ESD STM5.2:1999—Electrostatic discharge sensitivity testing—Machine model.

  ANSI/ESD STM5.3.1:1999—Charged device model (CDM)—Component level.

  ESD S6.1:1999—Grounding—Recommended practice.

  ANSI ESD S7.1:1994—Floor materials—Resistive characterization of materials.

  ANSI ESD S8.1:1993—ESD awareness symbols.

  ESD S9.1:1995—Resistive characterization of footwear.

  ESD SP10.1:2000—Automated handling equipment.

  ANSI ESD S11.11:1993—Surface resistance measurement of static dissipative planar materials.

  ESD STM11.12:2000—Volume resistance measurement of static dissipative planar materials.

  ANSI ESD S11.31:1994—Evaluating the performance of electrostatic discharge shielding bags.

  ESD STM12.1:1997—Seating-resistive characterization.

  ESD STM13.1:2000—Electrical soldering/desoldering hand tools.

  ANSI ESD S20.20:1999—Standard for the development of an ESD control program.

  ESD STM97.1:1999—Floor materials and footwear—Resistance in combination with a person.

  ESD STM97.2:1999—Floor materials and footwear voltage measurement in combination with a person.

  AFLCR 65-8:1998—Maintenance—Engineering and supply: Electrostatic discharge (ESD) control program.

  ANSI C63.14:1998—American national standard dictionary for technologies of electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD)—Dictionary of EMC/EMP/ESD terms and definitions.

  ANSI C63.16:1993—American national standard guide for electrostatic discharge test methodologies and criteria for electronic equipment.

  ANSI N322:1997—American national standard inspection, test, construction, and performance requirements for direct reading electrostatic/electroscope–type dosimeters.

  ANSI T1.308:1996—Central office equipment—Electrostatic discharge immunity requirements.

  ASQ P672:1996—Auditing ESD and cleanroom processes.

  ASTM D257-78—Standard test methods for dc resistance or conductance of insulating materials.

  ASTM D991-83—Standard test method for rubber properties—Volume resistivity of electrically conductive and antistatic products.

  ASTM D5077-90:1997—Standard terminology relating to electrostatic discharge (ESD) packaging materials.

  ASTM E1549-95:2000—Standard specification for ESD-controlled garments required in cleanrooms and controlled environments for spacecraft for nonhazardous and hazardous operations.

  ASTM F150-98—Standard test method for electrical resistance of conductive and static dissipative resilient flooring.

  ASTM F1812-97a—Standard test method for determining the effectiveness of membrane switch ESD shielding.

  Bellcore GR-1421-CORE:1995—Generic requirements for ESD-protective circuit packet containers.

  BS 6654:1985—Method for determination of the electrical resistivity of textile floor coverings.

  BS EN 100015-2:1994—Basic specification—Protection of electrostatic-sensitive devices—Requirements for low-humidity conditions.

  BS EN 100015-3:1994—Basic specification—Protection of electrostatic-sensitive devices—Requirements for cleanroom areas.

  BS EN 100015-4:1994—Basic specification—Protection of electrostatic-sensitive devices—Requirements for high-voltage environments.

  BS EN 1149-1:1996—Protective clothing—Electrostatic properties—Surface resistivity (test methods and requirements).

  BS EN 1149-2:1997—Protective clothing—Electrostatic properties—Test method for measurement of the electrical resistance through a material (vertical resistance).

  BS EN 1718:1999—Light conveyor belts—Test method for the measurement of the electrostatic field generated by a running light conveyor belt.

  DI-ATTS-80285B:1997—Engineering support data (ESD).

  DI-RELI-80669:1992—Electrostatic discharge (ESD) control program flag.

  DI-RELI-80671:1992—Handling procedures for electrostatic discharge (ESD) sensitive items.

  EIA 471:1980—Symbol and label for electrostatic sensitive devices.

  EIA 541:1988—Packaging material standards for ESD-sensitive items.

  EIA 541:1990—Packaging of electronic products for shipment.

  EIA 545:1989—Electromechanical switch test method for electrostatic discharge (ESD).

  EIA 625—Handling electrostatic discharge sensitive (ESDS) devices.

  EIA-JEP 108—Distributor requirements for handling electrostatic discharge sensitive (ESDS) devices.

  EOS/ESD EP102:1988—Electrostatic discharge and electronic equipment: A practical guide for designing to prevent ESD problems.

  EOS/ESD EP103:1990—ESD program management: A realistic approach to continuous, measurable improvement in static control.

  EOS/ESD EP105:1995—ESD in silicon integrated circuits.

  ESD 1:2000—General practices for ESD control for MR and GMR heads.

  IEC 60801-2:1991—Electromagnetic compatibility for industrial-process measurement and control equipment—Electrostatic discharge requirements.

  IEC 61000-4-2:1995—Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 2: Electrostatic discharge immunity test.

  IEC 61000-4-2:1999—Electromagnetic compatibility (EMC)—Part 4-2: Testing and measurement techniques—Electrostatic discharge immunity test.

  IEC 61087:1991—Guide for evaluating the discharges from a charged surface.

  IEC 61340-1:1998—Electrostatics—Part 1: Guide to the principles of electrostatic phenomena (IEC/101/35/CD).

  IEC 61340-2-2 tr3:2000—Electrostatics—Part 2-2: Measurement methods—Measurement of chargeability.

  IEC 61340-2-3:2000—Electrostatics—Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation.

  IEC 61340-3-1:1998—Electrostatics—Part 3-1: Methods for simulation of electrostatic effects—Human body model (HBM)—Component testing (IEC/101/33/CD).

  IEC 61340-3-2:1998—Electrostatics—Part 3-2: Methods for simulation of electrostatic effects—Machine model (MM)—Component testing (IEC/101/34/CD).

  IEC 61340-4-1:1995—Electrostatics—Part 4: Standard test methods for specific applications—Section 1: Electrostatic behavior of floor coverings and installed floors.

  IEC 61340-4-3:1999—Test method for the characterization of electrostatic protective footwear (IEC document 101/62/CD).

  IEC 61340-5-1 tr2:1998—Electrostatics—Part 5-1: Protection of electronic devices from electrostatic phenomena—General requirements.

  IEC 61340-5-2 tr2:1999—Electrostatics—Part 5-2: Protection of electronic devices from electrostatic phenomena—User guide.

  IEC/PAS 62162:2000—Field-induced charged-device model test method for electrostatic discharge withstand thresholds of microelectronic components.

  IEC/PAS 62179:2000—Electrostatic discharge (ESD) sensitivity testing human body model (HBM).

  IEC/PAS 62180:2000—Electrostatic discharge (ESD) sensitivity testing machine model (MM).

  IEEE C62.38:1994 (R1999)—IEEE guide on electrostatic discharge (ESD)—ESD withstand capability evaluation methods (for electronic equipment subassemblies).

  IEEE C62.47:1992—IEEE guide on electrostatic discharge (ESD)—Characterization of the ESD environment.

  ISO/DIS 10605:2000—Road vehicles—Test methods for electrical disturbances from electrostatic discharge.

  ISO/tr 10605:1994—Road vehicles—Electrical disturbances from electrostatic discharge.

  JESD 22-A114-B:2000—Electrostatic discharge (ESD) sensitivity testing human body model (HBM).

  JESD 22-A115-A:1997—Electrostatic discharge (ESD) sensitivity testing machine model (MM).

  JESD 22-C101-A:2000—Field-induced charged-device model test method for electrostatic discharge withstand thresholds of microelectronic components.

  MIL-PRF-87893B:1997—Workstation—Electrostatic discharge (ESD) control.
  QPL-87893-1:1995—Workstation electrostatic discharge (ESD) control.

  RAC SOAR 6:1986—ESD control in the manufacturing environment.

  SAE J551/15:1995—Vehicle electromagnetic immunity—Electrostatic discharge (ESD).